What Is the Replica 6654-1127-55?
The replica 6654-1127-55 is a copy of the Blancpain Villeret Quantième Complet, a 40mm stainless steel dress watch with a complete calendar and a moon phase at 6 o'clock. A strong copy matches the case size, the white opaline dial, and the corrector layout of the original. Asking prices land between $200 and $600, and the gap between those numbers comes down to the movement and the moon phase disc.
The 6654 reference belongs to the Villeret line, Blancpain's round-case dress family. The number points to the movement family, while the suffix covers metal, dial, and strap choices. That is why 6654-1127-55B marks a steel case, a white dial, and a leather strap.
Original specs worth matching
- Case size: 40mm across, about 11.7mm thick
- Case metal: stainless steel with a polished bezel
- Crystal: sapphire front and back
- Dial: white with applied markers and leaf-shaped hands
- Complications: day, month, date, and moon phase
- Movement: automatic with about 72 hours of reserve
- Water resistance: 30m
- Strap: alligator leather with a steel buckle
How the Dial and Calendar Read
Day and month sit in twin windows below 12 o'clock. The moon phase takes the 6 o'clock spot, and a thin serpentine hand points to the date on an outer track. That layout is the reason this reference gets copied: it looks complex, yet the dial stays clean.
On the original, the calendar correctors hide under the lugs, so the case band stays smooth. Most budget copies skip that detail and bolt four pushers onto the side of the case. Check the case band first, because that tell shows up in any photo.
What to Check on a Super Clone 6654-1127-55
Sellers use the super clone label for builds with better parts and a decorated automatic movement. Not every listing earns the label. Work through the checks below in order.
Case and thickness
A 40mm case that measures under 11mm looks flat on the wrist, and the calendar stack needs room. Ask the seller for a caliper shot with the caseback open. Reject builds where the crown sits too high or the lugs taper wrong.
Dial and moon phase
The moon phase disc is where cheap builds fall apart. A good disc shows a printed moon against a dark blue sky with stars. A bad one shows a plain gold circle that turns with the hour hand. Check the date track too, since thin or blurred numerals point to low-grade printing.
Correctors and pushers
Count the pushers. Four on the case side means the build used a generic calendar module instead of the hidden under-lug setup. That is not fatal, but it changes the look and should change the price.
Movement and rotor
Top builds use a modified automatic with a decorated rotor that echoes the original finish. Ask for a photo of the movement with the caseback open, plus a timegrapher reading. Anything above 15 seconds a day needs a service before it ships.
Strap and buckle
Alligator grain leather beats smooth plastic-looking leather every time. The buckle should carry clean engraving, not a smudged stamp. A cheap strap is easy to swap, so do not let it kill an otherwise good watch.
Movement Options in the Replica Market
- Quartz: keeps time, has no sweeping seconds, and fakes the moon phase with a printed disc. Cheapest tier.
- Generic automatic with a calendar module: decent timekeeping, thicker case, visible pushers.
- Modified clone movement: closest feel and finish, correct hand stack, working moon phase, highest price.
Only the last tier comes near the original in feel. The first two exist to hit a price, not to fool anyone who holds the watch.
Price Tiers for a 6654-1127-55 Clone
- Entry, about $200 to $280: quartz or basic automatic, printed dial, side pushers, no working moon phase.
- Mid, about $300 to $420: automatic with a calendar module, better dial printing, sapphire crystal.
- Top, about $450 to $650: decorated automatic, correct case profile, working moon phase, alligator strap.
Prices shift with the seller, the strap, and the currency. Two sites can list the same build for very different money.
Common Flaws to Watch For
- Case thickness over 13mm, which makes a dress watch wear like a diver.
- Day and month windows that sit off-center or show the wrong font.
- Moon phase that advances once a day instead of once every 29.5 days.
- Caseback engraving with spelling errors or missing reference text.
- Sharp lug edges and unfinished case flanks.
FAQ
Is the replica 6654-1127-55 worth buying?
It depends on what you want from it. The reference is a dress watch, so buy it if you wear tailoring or want a calendar complication in a slim case. Skip it if you need water resistance or a sports look.
Does the moon phase work on a clone?
On top-tier builds, yes. The disc runs on a 29.5-day cycle and lines up with the real lunar month. On entry builds, the disc often turns with the hour hand and means nothing.
Will a 40mm case fit my wrist?
A 40mm dress watch on a 6.5-inch to 7.5-inch wrist looks right, since the bezel is thin and the lugs curve. Short lugs help here, and this case has them.
How often does a clone need service?
Budget automatics need a clean and oil within three to five years. Top-tier builds last longer, but any automatic that gains time or feels gritty needs attention.
Caring for a 6654-1127-55 Clone
Keep the watch away from water beyond a splash, since 30m of resistance covers rain and hand washing only. Use a corrector tool or a soft wood toothpick to set the day and month. Never push a corrector between 9pm and 3am, because the calendar gears are engaged and forcing them can strip teeth.
Store it on a winder or give it a full wind every two weeks if you rotate watches. Leather straps last longer when you let them dry between wears and keep them out of strong sun.